Grey marble

Tundra Grey

Tundra Grey illustrative slab pattern: Cream-white branches divide an uneven taupe-grey field.
Slab patternCream-white branches divide an uneven taupe-grey field. Illustrative study.
Tundra Grey illustrative close-up: Pale seams separate the darker patches from the lighter ones.
Surface detailPale seams separate the darker patches from the lighter ones. Illustrative study.
Bookmatch simulationThe branching veins meet in a pale, angular centre. One image reflected; actual consecutive slabs will differ.

Material notes

Beyond the sample

One small sample may show a single taupe patch and miss the pale branch beside it. Read the full slab first, then place the outline of each tread, vanity or panel on that photograph.

Modern hotel walls, floors, stairs, bathrooms.

Request numbered slab photos
A group of small stone samples laid out beside a drawing.
Small samples seen together in daylight. General palette study; no sample is identified as Tundra Grey.

At the drawing board

Check the width of the cream seams where they will cross a joint. For a feature wall, request a dry layout or a scaled photographic layout before cutting.

Stone specification guide

Palette and lot review

Compare the cream seams with the intended white and the ground with oak, steel or warm grey. The seam colour and the ground can respond differently to neighbouring finishes.

Request the full face of each offered slab and a sample in the proposed finish. Note seam width, the ratio of light to dark areas and the size of the pieces you will cut.

Look at it under your room lighting

Tundra Grey is commonly considered for modern hotel walls, floors, stairs and bathrooms. Grey tones can read warmer or cooler depending on light, so tell us the lighting plan for each room: daylight direction, fixture color temperature and any wall washers or cove lights. Photos of a mock-up or a similar room help more than a written description.

Map bathroom and step layouts

In bathrooms, mark floor falls, shower thresholds, vanity tops and wall heights. For stairs and steps, give tread and riser sizes and the number of flights. List adjoining finishes such as metal trims, timber, grout color and fittings, so pieces can be discussed against the surfaces they will sit beside.

Choose your slabs

Ask for current slab photographs and a finish sample. Include the area, piece sizes and any joints that need to line up.

Request Tundra Grey slabs Ask for a finish sample Prepare your inquiry